How To Repair A Cracked Door Frame

If your interior or exterior door has been kicked in or your door frame has cracked, hither are a few tips on how to repair information technology. In farthermost cases the door frame and the wood around the door knob can both be broken and cracked. Most of the time these repairs can be done with wood glue, wood filler, and a wood clamp. In extreme cases, the best fashion to prepare both the door and the door jamb/frame is a repair kit or a reinforcement plate. A door jamb repair kit will commonly consist of a heavy duty strike plate and a door jamb metal overlay to hide cracks and reinforce the frame.

DOOR FRAME REPAIR 101

As we stated above, if the crack on the door frame is not farthermost, yous can repair this without a kit. A minor crevice in the wood can be fixed by following the steps below. If the crack in the wood is acquired past the door existence kicked in, then this would be considered extreme and a repair kit may be needed. You tin can attempt to fix your door jamb past using the steps beneath. Yet the wood may be weakened and needs to be reinforced. You can effort to repair the wood using woods filler. If glue and filler will non repair your door frame, continue reading below.

The item needed to reinforce the door frame is a long piece of metal that covers the door frame where the area is damaged. This part comes in a kit and is marketed for door security. It is the best pick for all purpose door frame repair and comes with multiple pieces to reinforce your broken door jamb/frame. The full name of this kit is the EZ Armor Ultimate Door Security Combo Set up. To fix the damage around your door knob, you lot will need to repair the woods if possible and install a Metal Door Knob Reinforcer.

The easiest way to set a broken door frame is…

1. Remove the metallic door take hold of/strike and or dead bolt catch/strike.
2. Scrape away any small chunks of wood that may be protruding from the door frame.
3. Be sure your door can fully shut. If not, remove any wood that is preventing the door from closing. One time you are sure your door tin can close, move to adjacent step.
4. Fully open the door to admission the door frame.
5. Apply wood glue and or wood filler into the crack/cracks making sure to go information technology as deep as possible.
6. One time the crevice is full of forest mucilage you will need to add multiple woods clamps to squeeze the crack shut.
7. Leave the woods clamps in identify for a few hours. Note: Your door will need to be open while the clamps are in identify and the glue is drying.
8. Once the mucilage is dry out, remove the wood clamps. The fissure should now be difficult to even see at present.
9. The forest will demand to be sanded down and painted.
10. Reinstall the door catch/strike and test door.

How To Repair A Door Jamb/Frame

Do you have experience repairing a broken door frame? If you know a improve manner of fixing a cracked door jamb, please leave a annotate below.

Source: https://removeandreplace.com/2014/09/11/how-to-fix-a-cracked-door-frame-yourself/

Share this post